top of page

Market Research Group

Public·6 members

Redsail Rs720c Driver For Windows 8

Redsail Rs720c Driver For Windows 8

The Redsail Rs720c is a cutting plotter that can be used to cut vinyl, paper, cardstock, and other materials. It has a control system based on a Risc micro-controller, a stepper motor drive, and a LCD display. It can work with various sign making software such as Coreldraw, Artcut, WinPCSIGN, and Flexi Sign. It can also support HPGL command and 232/USB interface.

To use the Redsail Rs720c with Windows 8, you need to install the appropriate driver for your device. The driver is a software that allows your computer to communicate with your plotter and send commands to it. Without the driver, your plotter will not function properly or at all.

Download Zip:

How to install the Redsail Rs720c driver for Windows 8

There are two types of drivers for the Redsail Rs720c: FTDI and CH341SER. The FTDI driver is for devices that use the FTDI chip, while the CH341SER driver is for devices that use the CH340 chip. You need to check which chip your device has before installing the driver. You can do this by looking at the label on the back of your plotter or by opening the device manager on your computer and checking the USB serial port.

Once you know which driver you need, you can download it from the Redsail website. You can also find the user manual and other resources there. After downloading the driver, follow these steps to install it:

  • Unzip the driver file and run the setup.exe file.

  • Follow the instructions on the screen and complete the installation.

  • Restart your computer if prompted.

  • Connect your plotter to your computer using a USB cable.

  • Open the device manager on your computer and check if your plotter is recognized as a USB serial port.

  • If not, right-click on the unknown device and select update driver software.

  • Browse to the folder where you installed the driver and select it.

  • Wait for the driver to be installed and confirm that your plotter is recognized as a USB serial port.

How to use the Redsail Rs720c with Windows 8

After installing the driver, you can use your plotter with any sign making software that supports it. You need to configure the software settings according to your plotter specifications and preferences. Here are some general steps to use your plotter with Windows 8:

  • Open your sign making software and create or import your design.

  • Select your plotter model from the output device list and adjust the output settings such as size, speed, force, etc.

  • Load your material into your plotter and align it properly.

  • Send your design to your plotter and wait for it to finish cutting.

  • Remove your material from your plotter and weed out the unwanted parts.

  • Apply transfer tape if needed and transfer your design to your desired surface.

Troubleshooting tips for Redsail Rs720c with Windows 8

If you encounter any problems with using your plotter with Windows 8, here are some tips to help you solve them:

  • Make sure you have installed the correct driver for your device and that it is up to date.

  • Make sure you have selected the correct output device and settings in your sign making software.

  • Make sure you have connected your plotter to your computer properly and that it is turned on.

  • Make sure you have loaded your material correctly and that it is compatible with your plotter.

  • Check if there are any errors or warnings on your plotter display or in your sign making software.

  • Refer to the user manual or contact Redsail support for more assistance.


Welcome to the group! You can connect with other members, ge...
Group Page: Groups_SingleGroup
bottom of page